Stopped by the brewhouse to clean and test a keg and noticed that the co2 tank connected to the keezer is out. The other tank was empty too it felt like. All the psi guages were at zero on thetank and in the keezer. I think that may mean there is a leak on the tank side, but not sure. If anyone was carbing still, it may not be.
Tue, May 5, 2015 - 5:05pm
#1
Keezer CO2 out
Is anyone able to get the tank filled tomorrow? I'm fairly certain all of the beer in there is carbing for the party.
I have the clubs credit card, I could swing by in the a.m. and get both tanks filled at NFC.
Leak test your fucking kegs with starsan! It is not hard! Second time in three weeks this has happened!
Thanks Chuck!
Here's a good video on detecting a leak & possible remidies. And when he says use soapy water, just substitute that with StarSan like Matt said above.
And I'm sure most of you do this already, but make sure to seat the lid a couple times with 30PSI (purging) before leaving it to carb.
https://www.youtube.com/watch?t=46&v=SclI7gKi-_g
Both tanks have been filled. NFC replaced our messed up valve handle on the steel tank for free. Bill is going to go over the kegs in the keezer and see what is leaking.
Awesome, thanks Chuck! Just in time for Cerveza!
I went over all the kegs in the keezer and could not positively identify one that was leaking. I decided it would be best to shut the gas off until we can get more eyes/ears on it on Friday. All the kegs in the keezer are under pressure, so if one is not by Friday we will know where the leak is.
The emperor is not as forgiving as i am